2009 BMW K1300S - Specifications

Engine
Configuration Water-cooled four-stroke straight-four power unit, two camshafts, four valves per cylinder
Bore x stroke 80 mm x 64.3 mm (3.15 x 2.53")
Capacity 1,293 cc
Max output 127 KW (175 hp) at 9,250 rpm
Max torque 140 Nm/103 lb-ft at 8,250 rpm
Compression ratio 13.0 : 1
Fuel supply/engine management
Electronic fuel injection, Digital Motor Electronics
with integrated knock control (BMS-K)
Valve/gas control DOHC (double overhead camshaft)
Diameter inlet 32
Diameter outlet 27,5
Throttle valve diameter 46
Exhaust management Fully controlled three-way catalyst, EU3 emission standard
Performance/Fuel Consumption
Top speed 200 km/h (124 mph) +
Fuel consumption at a steady 90 km/h (56 mph)
4.7 ltr/100 km (60.1 mpg imp)
Fuel consumption at a steady 120 km/h (75 mph)
5.3 ltr/100 km (53.3 mpg imp)
Fuel grade Premium Plus, unleaded, 98 RON; automatic knock control also allowing the use of premium down to 95 RON

Electrical System
Alternator 580 W three-phase alternator
Battery 12 V/14 Ah, maintenance-free

Power Transmission
Clutch Multiple-plate clutch in oil bath, hydraulically operated
Gearbox Dog-shift six-speed gearbox
Primary Transmission 1,559
Transmission, gear stages
I 2,398
II 1,871
III 1,525
IV 1,296
V 1,143
VI 1,015
Secondary drive Drive shaft

Suspension/Brakes
Frame Bridge frame, aluminium, engine load-bearing
Front wheel guidance/spring elements
BMW Motorrad Duolever; central spring strut
Rear wheel guidance/spring elements
Cast aluminium single swing arm with BMW Motorrad
Paralever; central spring strut with lever system,
spring pre-tension adjustable infinitely by hand wheel
in a hydraulic process, rebound damping adjustable
Spring travel, front/rear 115 mm/135 mm (4.52"/5.31")
Wheelbase 1,585 mm (62.4")

Suspension/Brakes
Castor 104.4 mm (4.11")
Steering head angle 60.4??lsaquo;

Wheels Cast aluminium wheels
Rim dimensions, front 3.50 x 17"
Rim dimensions, rear 6.00 x 17"
Tyre, front 120/70 ZR 17
Tyre, rear 190/55 ZR 17
Brake, front Double-disc brake, fl oating brake discs,
diameter 320 mm (12.6"), four-piston fi xed calliper
Brake, rear Single-disc brake, diameter 265 mm (10.4"),
double-piston fl oating calliper
ABS Standard: BMW Motorrad Integral ABS (semi-Integral)

Dimensions/Weight
Seat height 820 mm/32.3"
(low seat: 790 mm/31.1")
Step arch length 1,810 mm/79.3"
(low seat: 1,750 mm/68.9")
Weight, unladen,
in road trim and with full tank
254 kg (560 lb)
Dry weight 228 kg (503 lb)
Max permissible 460 kg (1,014 lb)
Max load (in standard trim) 206 kg (454 lb)
Useful tank capacity 19 ltr (4.2 imp gals)
Thereof reserve approx 4.0 ltr (0.9 imp gals)
Length 2,182 mm (85.9")
Height (without mirrors) 1,221 mm (48.1")
Width (on mirrors) 905 mm (35.6")

The colour concept of the new BMW K 1300 S accentuates the unmistakable character of this new machine. The non-metallic colours form a strong and powerful contrast to the black surfaces at the front, giving the K 1300 S an even more compact and agile look from the side.

The colours available are Light Grey Metallic and Lava Orange Metallic. The unique multi-colour fi nish in Granite Grey Metallic/Light Grey Metallic with Magma Red highlights, in combination with wheels finished in Glossy Black, creates the sophisticated and striking look so typical of BMW and appealing above all to the sporting, performance-minded rider. The frame and suspension components on all colour variants are finished in Asphalt Metallic.